Titanium Coil Tube

Shaanxi North Steel provide titanium coil fabrication services and supply engineering organisations worldwide with titanium coil tubes for use in heat exchangers.

We have been manufacturing titanium coil tubing since 1993 and are reknowned for rapid production at the lowest market rates.

We manufacture our own titanium tubing from sponge with material quality guaranteed at the lowest market prices! We are ASME certified: “U”, “UM”, and “R” stamps and all our products are supplied with verified testing certificates and qualifications.

Why North Steel for Titanium Coil Tubing?

Titanium Tube Coil Types

We’ve been manufacturing coils since 1993 and have produced the following types of titanium coil:

Gallery of Our Titanium Coils

The gallery below shows a number of titanium tube coils we have created.

Custom Gallery: images not found

Technical Designs

The technical design templates below assist in specifying the required dimensions of the respective titanium tube coil types.

Helical CoilHelical Coil NestedTrombone CoilTapered Spiral CoilRectangular BoxZigZag FlatZigZag ContourZigZag CollapsedZigZag ContinuousBasket CoilFlat Spiral Coil

Dimensions

A) Tube/Pipe Pitch
B) Centerline Diameter
C) Tangent Length
D) Inlet Distance to Center
E) Outlet Distance to Center
F) Height Or Number of Turns

Dimensions

A) Outside Tube/Pipe Pitch
B) Inside Tube/Pipe Pitch
C) Outside Center Diameter
D) Inside Center Diameter
E) Tangent Length
F) Outlet Distance to Center
G) Inlet Distance to Center
H) Height Or Number of Turns

Dimensions

A) Tube/Pipe Pitch
B) Overall Length
C) Center Diameter
D) Tangent Length
E) Inlet/Outlet Tangent Length
F) Height or Number of Turns

Dimensions

A) Tube/Pipe Pitch
B) Large Centre Dia
C) Smallest Radius
D) Outside Tangent
E) Inside Tangent
F) Dish Radius

Dimensions

A) Tube/Pipe Pitch
B) Overall Length
C) Overall Width
D) Long Tangent Length
E) Width Tangent Length
F) Inlet/Outlet Tangent Length
G) Height or Number of Turns
H) Turn Radius

Dimensions

A) Centerline Diameter or Pitch
B) Overall Length
C) Coil Tangent Length
D) Inlet/Outlet Tangent Length
E) Centerline Height
OR
E) Number of Turns

Dimensions

A) Tube/Pipe Pitch
B) Second Pitch (if different)
C) Tangent Length
D) Second Tangent Length
E) Top Height/Turns
F) Bottom Height/Turns
if E) = F) Total Height/Turns
G) Perimeter Limitation
Note: (G) does Not Have to be Circular

Dimensions

A) Tube/Pipe Pitch
B) Centerline Diameter
C) Overall Length
D) Coil Tangent Length
E) Inlet/Outlet Tangent Length
F) Centerline Height
OR
G) Number of Turns

Dimensions

A) First Centerline Diameter
B) Second Centerline Diameter
C) Overall Length
D) Coil Tangent Length
E) Inlet/Outlet Tangent Length
F) Centerline Width
G) Centerline Height

Dimensions

A) Tube/Pipe Pitch
B) Largest Center Diameter
C) Smallest Radius
D) Outside Tangent
E) Inside Tangent
F) Dish Radius

Dimensions

A) Tube/Pipe Pitch
B) Outside Center Diameter
C) Inside Radius
D) Outside Tangent
E) Outside Tangent Length
F) Inside Tangent Length