Titanium Sheet

titanium sheetNorth Steel Co. is a recognized leader in titanium sheet and plate manufacture and supply across China and globally. North Steel Co. offers the widest range of titanium sheet in Grade, dimensions and standards.

Titanium sheet dimension range is from a thickness as low as 0.3 mm and lengths up to 5600 mm by width of 2800 mm. Contact us now for the latest in titanium sheet prices and availability.

Having invested significantly in advanced titanium sheet metal rolling equipment the machine inventory includes best in class rolling equipment.

Ti sheet production inventory includes a 1,500m, four high reversible hot and cold rolling mill taking annual titanium plate production capability up to 3000 tonnes.

Titanium plate and sheets are engineered to international standards and specifications and undergo the highest level of quality control. Engineering standards defining the chemical composition, mechanical property and the tolerance of sheets are complemented with full independent testing. North Steel Co. supply titanium plate in a range of surface finishes which is produced typically by pickling and sandblasting as per customer requirements to ensure the required quality finish.

Titanium Sheet Production Capability

The specification below provides a summary overview to the production capability. Dimensions, grade and supply states are interdependent so contact us today with your specification.

  • Production Standards: ASTM B265, ASTM SB265, AMS 4902, ASME SB265, DIN 17860
  • Titanium Grades: Gr 1, 2, 3, 4, 5(6Al-4V), 7(Ti-0.15Pd), 9(3Al-2.5V), 12, 23(6AL-4V ELI), 15V-3Al-3Sn-3Cr
  • Titanium Sheet Dimensions: Thickness: 0.3 – 300 mm, Length: 1000 – 5600 mm, Width: 400 – 2800 mm
  • Titanium Sheet Surface Finishes: Polished, Mill, Pickling, Painted, Brushed or Blasted
  • Rating: 4.7 / 5 based on 7 customer reviews

Titanium Sheet Specification

North Steel Co. manufacture both pure titanium sheet metal and titanium alloy plate and sheets to ASTM B265, ASME SB265 standards and other regional standards. North Steel Co. have a wealth of experience in titanium supply had have been a china titanium sheet supplier for over 30 years. In that time North Steel Co. have seen the titanium plates industry evolve and to keep ahead of the rest North Steel Co. have focused on quality in titanium sheets and have established North Steel Co. as a trusted titanium plate supplier.

ASTM Grades Processing thickness (mm) Delivery States* Sizes (Thickness × Width × Length) (mm)
Rolling Size Range
1, 2, 3, 4, 7 Hot Rolled 0.3 < t < 4.0 R M 0.3-0.5 × 400-600 × 15000
0.6-0.8 × 400-800 × 1200
0.9-6.0 × 400-1000 × 1000-3000
6.1-15 × 400-2000 × 1000-4000
16-60 × 400-2800 × 1000-5600
Cold Rolled 4.1 < t < 60 Y M
12 Hot Rolled 0.5 < t < 4.0 R M
Cold Rolled 4.1 < t < 60 Y M
5, 6 Hot Rolled 0.8 < t <4.0 R M
Cold Rolled 4.1 < t < 60 Y M

* The titanium plates generally use the hot-rolled and cold-rolled process. Supply statuses are: hot-rolled state (R), cold-rolled state (Y), annealed (M), quenched state (C).

Medical Titanium Plate Specifications

North Steel provide medical grade titanium to meet the ever growing demand for titanium implants such as titanium bone structure supports, titanium prosthetics, titanium tooth implants.

Titanium Plate Specifications Used for Medical Titanium
Medical titanium plate
No. Grade Size (mm) State Standard
1 Gr2,Gr3 3 x 11 x (500~1000) bright ASTM F67
2 Gr2,Gr3 3.5 x 12 x (500~1000) bright ASTM F67
3 Gr2,Gr3 4 x 14 x (500~1000) bright ASTM F67
4 Gr5 THK 3~60 bright ASTM F136

Heat Exchanger Titanium Plate Specifications

One of the widest and most current uses of titanium plate and sheet today is for its use in titanium heat exchangers. From the miniature fish tank heat exchangers used to maintain correct water temperature right through to some of the worlds largest industrial ti heat exchangers. North Steel provide the highest quality ti sheet and ti plate to meet all requirements and application.

Heat Exchangers, Titanium Plate Specifications
Titanium sheet for plate heat exchanger
Grade Size (mm) State  Standard
Thickness Width Length
Gr1, Gr7 0.5~0.8 200~500 500~2000 M ASTM B265
0.9~1.0 200~500 500~2000 M ASTM B265
0.5~0.8 500~800 800~2000 M ASTM B265

Titanium Sheets and Plates Specifications

The table below details the specification of titanium plates which North Steel provide by titanium grade, titanium sheet thickness, size, surface finishing and the production technique. For an instant quote on titanium plate prices contact us now.

Ti Sheet and Ti Plate Specification
Grade Grade1, Grade 2, Grade 3, Grade 4, Grade 5, Ti-6AL4V ELI, Grade7, Grade 9, Grade 12
Thickness  0.3mm – 400mm
Size 1000*2000mm, 2400*6000mm
Surface Pickling  or Polishing
Technique Hot or cold rolling or annealed

Titanium Sheet Surface Finish

Titanium sheet and plate can be supplied to a number of different surface finishes. The importance of the surface finish is largely determined by the application and closeness to finished state as typically surfaces of products maybe be completed after final fabrication. The common supply state is an annealed mill finish however North Steel Co. can offer various surface finishes dependent on size and supply conditions. The differing types of surface finishes are:

  • Milled
  • Polished
  • Pickling (descaled)
  • Brushed
  • Blasted – Shot / Sand

Finishing and supply states which result in different surfaces are not explicitly defined in standards and as such are largely dependent on the individual mill and agreements outside of any standards. The ASTM B600 standard is the key standard in providing a guide to the descaling and cleaning of titanium and titanium alloys but does not define the gloss, colour or roughness that a surface should have. The table below can be seen as an approximate measure of surface roughness for each of the processing techniques:

Typical surface Ra (micrometres μm)* Production and Surface Finish Technique
Rolling Annealing Pickling (descaled) Blasted Polished Apperance and Notes
4.0 – 7.0 H Y Y Common supply state for applications concerned with on anti-corrosion and heat resistence.
0.4 – 1.0 C Y Y Matt, non-reflective finish
0.4 – 1.0 C Y Y Matt, non-reflective finish
0.1 – 0.5 H Y Y Commonly sheet and coil finish which is bright and moderately reflective
0.2 – 1.0 C Y Y Y Popular polished finish common in food production equipment, Used with grit polished and approx 120 to 150 msh size
0.05 – 0.1 C Y – Bright highly reflective surface with a mirror-like appearance with some degree of milkiness to coloration.
< 0.1 C Y Y Y -Mirror Polish A mirror polished finish complemented fine buff rouge this is the highest reflection finish available for titanium sheet.
< 0.5 C Y Y Y -Satin Polish finer satin polished provides surface with clean cut and good corrosion resistance and common for maritime uses.

Notes on supply

  • Finishes are applied to one side
  • Polished sides are covered in a PE layer
  • Sheets for laser cutting are normally supplied with a finish



Titanium Foil

    • North Steel Co. supply titanium foil to the following size ranges:
  • 0.51-4.78 mm thick
  • 610-1220 mm width
  • ≤6100 mm length


Titanium Sheet and Plate Machinery

North Steel Co. titanium sheet and titanium foil equipment includes several rolling machines, shearing and water cutting machines to support the production of titanium sheet in a full range of sizes and grades. Machines are managed as part of an internal quality assurance programe which provides regular inspection, maintenance and calibration of machinery to ensure quality is maintained. To visit our production facility contact the North Steel Co. sales team today.


Titanium Sheets and Plate Stock

The North Steel Co stock programe is focussed on rapid supply of fullest range of titanium sheets. North Steel Co also holds stock of billets to allow for rolling and shortened production lead times.


Titanium Production Quality Assurance

North Steel have invested heavily in Quality Assurance and believe it is a competitive advantage and the reason why customers return as well as a market busting low titanium plate price. North Steel vision is to be come a trusted and reliable sourcing partner for customers and with that means delivering the very best service. Highlights of the North Steel Quality Assurance program is:

  • Advanced equipment & advanced technical level.
  • Service management & QC system,  control quality from raw material sponge and every processes.
  • All products are supplied with a “Product Quality Certificate” from an independent inspector.

Titanium Sheet Production and Technology

Titanium and titanium alloy plate / sheet production process:

1. Hot rolling plates

Titanium sponge →compacting electrodes →melting → slabs →  hot rolling → hot rolling plates

2. Hot rolling alloy plates:

Titanium sponge  →   metal additive  →  compacting electrodes  →  melting →  slabs  →   hot rolling →   hot rolling alloy plates

3.Cold rolling sheets

Titanium sponge   →  compacting electrodes   →   melting   →   slabs   →   hot rolling   →    cold rolling  → picking → cold  rolled sheet

4. Cold rolling alloy sheets:

Titanium sponge →  metal additive  →  compacting electrodes → melting    →   slabs   →    hot rolling  →   cold rolling      picking    →   cold rolling alloy sheets

Titanium Sheet and Plate Application

Titanium sheet is widely used in heat exchanges and reaction towers in the petrochemical industry, they are also used extensively in paper pulp production, fertilizer production, fiber production, and in electrochemical and desalination processes. North Steel titanium sheets and titanium alloy plates have been used in a wide range of applications and North Steel supply direct to engineering firm looking to get the best ti sheet prices and titanium plate distributors looking to stock locally in country.

Titanium plates are also widely used as the electrolytic plate in the electrolysis and sewage dilution. Titanium plates also have a number of marine applications being used widely in the production of propulsion systems, power systems, electronic information systems and auxiliary systems etc.

Titanium Sheet Showcase

Titanium Sheets Plates North Steel China Direct

Titanium Product Characteristics and Performance

Titanum sheet and titanium plate is used across a wide range of applications. It can be found in applications needing the very blend of weight and strength. Titanium plate and sheet characteristics can be summarised by:

  1. Ti sheets have an excellent corrosion resistance & excellent elongation capabilities;
  2. Ti sheets have a low density and light weight;
  3. Ti sheets and plates have high strength;
  4. Titanium has high / low temperature resistance and excellent for use in extreme conditions.

Other Titanium Products

North Steel manufacture and produce all standard mill products including titanium bars, plate titanium, titanium tubes, titanium ingots and titanium powder. North Steel also supply standard forged parts such as titanium discs and billets. North Steel also offer a forging and casting service to produce custom products.